Cube L4-1.8L (MR18DE) (2010)
FRONT WIPER CONTROL
IPDM E/R detects front wiper stop position by a front wiper stop position signal.
When a front wiper stop position signal is in the conditions listed below, IPDM E/R stops power supply to wiper after repeating a front wiper 10
seconds activation and 20 seconds stop five times.
NOTE:
This operation status can be confirmed on the IPDM E/R "Data Monitor" that displays "BLOCK" for the item "WIP PROT" while the wiper is
stopped.
Work Flow
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
OVERALL SEQUENCE