Cube L4-1.8L (MR18DE) (2010)
Power Distribution Module: Service and Repair
Removal And Installation
With I-Key
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
Removal and Installation
CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.
REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Remove the IPDM E/R (1) while pressing the pawls (A).
Arrow Indicates : Vehicle front
3. Disconnect the harness connector and then remove the IPDM E/R.
INSTALLATION
Install in the reverse order of removal.
Without I-Key
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
Removal and Installation
CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.
REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Remove the IPDM E/R (1) while pressing the pawls (A).
Arrow Indicates : Vehicle front
3. Disconnect the harness connector and then remove the IPDM E/R.
INSTALLATION
Install in the reverse order of removal.