Cube L4-1.8L (MR18DE) (2010)
Drive Shaft Installation Bolt : 44.3 N.m (4.5 kg-m, 33 ft-lb)
HOW TO USE THIS MANUAL
Terms
-
The captions WARNING and CAUTION warn you of steps that must be followed to prevent personal injury and/or damage to some part
of the vehicle.
WARNING indicates the possibility of personal injury if instructions are not followed.
CAUTION indicates the possibility of component damage if instructions are not followed.
BOLD TYPED STATEMENTS except WARNING and CAUTION give you helpful information.
Standard value: Tolerance at inspection and adjustment.
Limit value: The maximum or minimum limit value that should not be exceeded at inspection and adjustment.
Connector Symbols
HOW TO READ WIRING DIAGRAMS
Connector Symbols
Most of connector symbols in wiring diagrams are shown from the terminal side.
-
Connector symbols shown from the terminal side are enclosed by a single line and followed by the direction mark.
-
Connector symbols shown from the harness side are enclosed by a double line and followed by the direction mark.
-
Certain systems and components, especially those related to OBD, may use a new style slide-locking type harness connector.
For description and how to disconnect, refer to Power Supply, Ground & Circuit Elements, "Description", "HARNESS CONNECTOR".