Cube L4-1.8L (MR18DE) (2010)
/Page-613009.png)
IMPORTANT:
Use only adhesive sealant P/N 17290 - 1FC2A.
^ Use adhesive sealant generously.
^ Outer half is shown; inner half is a mirror image.
15. Place the inner half of the protector on the fuel filler tube as shown.
16. Make sure the recirculation tube is in the grove of the inner half of the protector.
17. Hold the inner half in place while instilling the outer half.
18. Install washers and bolts.
