Cube L4-1.8L (MR18DE) (2010)
Control Module: Service and Repair
Removal And Installation
TCM
Removal and Installation
REMOVAL
CAUTION:
When replacing TCM and transaxle assembly as a set, replace transaxle assembly first and then replace TCM. See: Powertrain
Management/Transmission Control Systems/Testing and Inspection/Programming and Relearning/TCM Replacement/Description.
1. Disconnect the battery cable from the negative terminal. See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Removal And Installation.
2. Disconnect TCM connector.
3. Remove TCM.
INSTALLATION
Install in the reverse order of removal.