Cube L4-1.8L (MR18DE) (2010)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Removal And Installation
AMBIENT SENSOR
Removal and Installation
REMOVAL
1. Remove the bumper fascia. See: Body and Frame/Bumper/Front Bumper/Service and Repair/Exploded View.
Broken Triangle : Pawl
2. Disengage the pawl, and then remove ambient sensor (2) from bracket (1).
3. Disconnect ambient sensor connector, and then remove the ambient sensor.
INSTALLATION
Installation is basically the reverse order of removal.