Cube L4-1.8L (MR18DE) (2010)
Refrigerant Pressure Sensor / Switch: Service and Repair
Manual Air Conditioner
Exploded View
REFRIGERANT PRESSURE SENSOR
Exploded View
Removal And Installation
REFRIGERANT PRESSURE SENSOR
Removal and Installation
CAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large amount of refrigerant or lubricant is
detected, never perform lubricant return operation. See: Heating and Air Conditioning/Refrigerant Oil/Service and Repair/Perform
Lubricant Return Operation.
REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant. See: Heating and Air Conditioning/Refrigerant/Service and
Repair/Recycle Refrigerant.
2. Clean refrigerant pressure sensor and its surrounding area, and then remove dust and rust from refrigerant pressure sensor.
CAUTION:
Be sure to clean carefully.
3. Disconnect refrigerant pressure sensor connector.