Cube L4-1.8L (MR18DE) (2010)
Start / Stop Switch: Service and Repair
Removal And Installation
PUSH-BUTTON IGNITION SWITCH
Removal and Installation
REMOVAL
Broken Triangle : Pawl
1. Remove the switch panel finisher. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Assembly.
2. Disconnect the push-ignition switch (2) fixing pawl using a flat-blade screwdriver (A), and then remove NATS antenna amp..
INSTALLATION
Install in the reverse order of removal.