Cube L4-1.8L (MR18DE) (2010)
Clutch Pedal Assembly: Removal and Replacement
Exploded View
CLUTCH PEDAL
Exploded View
Removal and Replacement
CLUTCH PEDAL
Removal and Installation
REMOVAL
1. Disconnect ASCD clutch switch connector. (With ASCD)
2. Disconnect clutch interlock switch connector.
3. Disconnect clip of harness from clutch pedal.
4. Remove master cylinder rod end (Black Arrow) from clutch pedal.
5. Remove ASCD clutch switch and clip from clutch pedal. (With ASCD)
6. Remove clutch interlock switch, clip, and pedal pad from clutch pedal.