nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

CVT Controls - RPM Fluctuation At Highway Speeds|Page 2609 > < Exploded View|Page 2599
Page 1
background image

Control Module: All Technical Service Bulletins
CVT Controls - RPM Fluctuation At Highway Speeds

Classification: AT11-002

Reference: NTB11-016

Date: February 24, 2011

2009-2010 CUBE(R); RPM CHANGE AT HIGHWAY SPEED

APPLIED VEHICLES: 2009-2010 cube(R) (Z12)

APPLIED VINs and DATES 
2009 cube(R) - All
2010 cube(R) - Vehicles built through JN8AZ2KR(*)AT 169188 and June 29, 2010

IF YOU CONFIRM:

A 400-600 engine RPM fluctuation during constant highway speeds (actual vehicle speed does not change when this occurs, only RPM).

ACTIONS:

1. Refer to Step 2 under Reprogram TCM in the Service Procedure to confirm this bulletin applies to the vehicle you are working on.

2. If this bulletin applies, do the following:

a. Reprogram the TCM.

b. Replace the CVT assembly.

c. Replace the radiator (with cooler) assembly.

d. Perform TCM Initialization.

IMPORTANT:

The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE
PROCEDURE as it contains information that is essential to successfully completing the repair.

PARTS INFORMATION 

CVT Controls - RPM Fluctuation At Highway Speeds|Page 2609 > < Exploded View|Page 2599