Cube L4-1.8L (MR18DE) (2010)
Arrow Indicates : Vehicle front
-
Insert the each lock plate until it reaches the cable mounting bracket.
Install the selector cable according to the following instructions.
1. Install the selector cable (1) on the cable mounting bracket to install the lock plate.
2. Install the selector cable on the selector lever (2).
3. Slide the stopper (3) in the direction of the arrow (A) shown in the figure.
4. Press the lock (4) in the direction of the arrow (B) shown in the figure.
CAUTION:
Never move the selector lever.
5. Side the stopper in the direction of the arrow (C) shown in the figure.
CAUTION:
Never move the selector lever.