Cube L4-1.8L (MR18DE) (2010)
Power Window Switch: Service and Repair
Removal And Installation
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2). See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Removal And Installation.
Broken Triangle Indicates : Pawl
2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.
CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).
INSTALLATION
Install in the reverse order of removal.
NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. See: Testing and Inspection/Programming
and Relearning/Additional Service When Removing Battery Negative Terminal/Special Repair Requirement.