D21 Hardbody 2WD L4-2389cc 2.4L SOHC MFI (KA24E) (1990)
^
If clearance (G) is out of specification, adjust clearance (G) using adjusting screw (B) to 2.3 mm (0.091 in) (M/T) or 2.1 mm (0.083 in.) (A/T).
^
On new throttle bodies (produced on and after January 1, 1990), an alignment mark will be added to the F.I.C., allowing the top of the cam to face
in the correct direction.
^
Set the mark to point at the roller center.