D21 Hardbody 2WD L4-2389cc 2.4L SOHC MFI (KA24E) (1990)
A/T Lock-Up Release Control: Testing and Inspection
Lock-Up Cancel Solenoid Test
1.
Disconnect transmission harness connector.
2.
Using an ohm meter, check the resistance between terminals 1 and 3.
Resistance should be approximately 25 ohms.
3.
Replace the solenoid if it fails the above test. Refer to TRANSMISSIONS CLUTCHES DIFFERENTIALS AXLES AND DRIVE SHAFTS
for replacement procedures.