D21 Hardbody 2WD L4-2389cc 2.4L SOHC MFI (KA24E) (1990)
0.15 mm (0.0059 inch) / 43086-B9500
0.25 mm (0.0079 inch) / 43089-P0110
0.50 mm (0.0197 inch) / 43090-P0110
1.00 mm (0.0394 inch) / 43036-01G00
CAUTION: Do not insert end shims between case seal and bearing cage.
b. Insert axle shaft with Tool as a guide.
CAUTION: When inserting axle shaft, be careful not to damage oil seal.
c. Measure end play of axle shaft.
Axial end play:
Servicing only one side of axle shaft:
0.02 - 0.15 mm (0.0008 - 0.0059 inch)
Servicing both side axle shafts:
On first axle shaft (right or left) adjust axial end play:
0.30 - 0.90 mm (0.0118 - 0.0354 inch)
After servicing second axle shaft, total end play:
0.02 - 0.15 mm (0.0008 - 0.0059 inch)
d. If axial end play is not within the specified limit, reselect axle case end shims.
CAUTION: While adjusting axial end play, be careful not to damage oil seal.
Disc Brake Equipped
Rear Axle