nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Neutral Switch <--> [Transmission Position Switch/Sensor, A/T] > < Downshift Switch, A/T|Locations

D21 Hardbody 2WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)

Page 1
background image

detention switch/sensor: Service and Repair

Inhibitor Switch Adjustment

1. Remove manual control linkage from manual shaft of A/T assembly.
2. Set manual shaft of A/T assembly in "N" position.
3. Loosen inhibitor switch fixing bolts.

4. Insert pin into adjustment holes in both inhibitor switch and manual shaft of A/T assembly as near vertical as possible.
5. Reinstall any part removed.
6. Check continuity of inhibitor switch. 

Neutral Switch <--> [Transmission Position Switch/Sensor, A/T] > < Downshift Switch, A/T|Locations