D21 Hardbody 2WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)
detention switch/sensor: Service and Repair
Inhibitor Switch Adjustment
1. Remove manual control linkage from manual shaft of A/T assembly.
2. Set manual shaft of A/T assembly in "N" position.
3. Loosen inhibitor switch fixing bolts.
4. Insert pin into adjustment holes in both inhibitor switch and manual shaft of A/T assembly as near vertical as possible.
5. Reinstall any part removed.
6. Check continuity of inhibitor switch.