D21 Hardbody 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)
Brake Rotor/Disc: Service and Repair
Installation
Front axle exploded view-4WD
INSTALLATION
Mount rotor on hub with matching marks aligned and torque bolts to specification. 49-69 Nm (36-51 ft lb)
HUB INSTALLATION - 4WD
Install hub assembly and adjust wheel bearing preload as follows:
1. Before adjustment thoroughly clean all parts to prevent dirt entry.
2
Apply multi-purpose grease sparingly to the following parts:
^
Threaded portion of spindle
^
Contact surface between wheel bearing washer and outer wheel bearing
^
Grease seal lip