D21 Hardbody 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)
/Page-369009.png)
STANZA: Refer to Figures 7 and 8 Mark hose in the middle of lower section of hose inclined at a 45 angle (Fig. 8). From this mark measure 3/8"
toward the radiator end and toward the engine end and mark both places. Using the last two marks, cut a 3/4" section from the hose.
Be sure the cut piece is on a straight section of hose and try to keep the hose in its original shape.
Truck/Pathfinder: Refer to Figures 9 and 10 Mark hose in the middle of straight section of hose connected to the engine (Fig. 10). From this mark
measure 3/8" to 1/2" toward the radiator end and toward the engine end and mark both places. Using the last two marks cut a 3/4" to 1" section
from the hose. Be sure the cut piece is on a straight section of hose and try to keep the hose in its original shape.
