D21 Hardbody 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)
WARNING:
a. Place vehicle on a flat and solid surface.
b. Place chocks at front and back of rear wheels.
c. Do not remove engine until exhaust system has completely cooled off. Otherwise, you may burn yourself and/or fire may break out in the
fuel line.
d. For safety during subsequent steps, the tension of wires should be slackened against the engine.
e. Before disconnecting fuel hose, release fuel pressure from fuel line
Refer to "Releasing Fuel Pressure".
f.
Before removing front axle from transmission, place safety stands under designated front supporting points.
g. Be sure to hoist engine and transmission in a safe manner.
h. For engines not equipped with engine slingers, attach proper slingers and bolts described in various parts catalogs.
CAUTION: When lifting engine, be careful not to strike adjacent parts, especially the accelerator wire casing, brake lines, and brake master cylinder.