D21 Hardbody 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)
4. Draw out axle shaft with Tool.
Note: When drawing out axle shaft, be careful not to damage oil seal.
5. Remove oil seal.
Note: Do not reuse oil seal once it is removed. Always install new one.
6. Unbend lock washer with a screwdriver.
Note: Do not reuse once removed lock washer. Always install new one.
7. Remove bearing lock nut with Tool.
8. Remove wheel bearing together with bearing housing and baffle plate from axle shaft.