D21 Hardbody SE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Diode: Testing and Inspection
Warning Lamps
Diode Check
^ Check continuity using an ohmmeter.
^ Diode is functioning properly if test results are as shown in the figure.
NOTE: Specifications may vary depending on the type of tester. Before performing this inspection, be sure to refer to the instruction manual for the
tester to be used.
Diode Check
^ Diodes for warning lamps are built into the combination meter printed circuit.