D21 Hardbody SE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1549011.png)
-
Measurement of clearance between retaining plate and snap ring
Specified clearance:
Standard: 1.8 - 2.2 mm (0.071 - 0.087 inch)
Allowable limit: 2.8 mm (0.110 inch)
Retaining plate Part Number and thickness:
31537-417X71: 3.4 mm (0.134 inch)
31537-417X61: 3.6 mm (0.142 inch)
31537-417X62: 3.8 mm (0.150 inch)
31537-417X63: 4.0 mm (0.157 inch)
31537-417X64: 4.2 mm (0.165 inch)
31537-417X65: 4.4 mm (0.173 inch)
31537-417X66: 4.6 mm (0.181 inch)
31537-417X67: 4.8 mm (0.189 inch)
Low and Reverse Brake
DISASSEMBLY
