D21 Hardbody SE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
5. Remove forward one-way clutch and end bearing as a unit from forward clutch hub.
6. Remove snap ring from forward clutch hub.
INSPECTION
Rear Internal Gear And Forward Clutch Hub
-
Check gear for excessive wear, chips or cracks.
-
Check frictional surfaces of forward one-way clutch and thrust washer for wear or damage.
-
Check spline for wear or damage.
Snap Ring And End Bearing
-
Check for deformation or damage.
ASSEMBLY
1. Install snap ring onto forward clutch hub.
2. Install end bearing.