D21 Hardbody XE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1374001.png)
Throttle Cable/Linkage: Service and Repair
CAUTION:
^
When removing accelerator wire, mark lock nut's initial position.
^
Check that throttle valve opens fully when accelerator pedal is fully depressed. Check that throttle valve returns to idle position when accelerator
pedal is released.
^
Check accelerator control parts for improper contact with any adjacent parts.
^
When connecting accelerator wire, do not twist or scratch the inner wire.
Adjusting Accelerator Wire
CAUTION: Make sure the ASCD wire is not pulling the throttle drum.
1. Loosen lock nut, and tighten adjusting nut until throttle drum starts to move.
2. From that position turn back adjusting nut 1.5 to 2 turns, and secure lock nut.
