D21 Hardbody XE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1451001.png)
Ignition Coil: Testing and Inspection
COMPONENT INSPECTION
Ignition coil
1. Disconnect ignition coil harness connector.
2. Remove distributor cap.
3. Check resistance as shown in the figure.
Terminal / Resistance [at 25°C (77°C)]
(7) - (8) / Less than 1 ohm
(7) - (9) 7 - 13 K Ohms
If NG, replace distributor assembly.
