D21 Hardbody XE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1745001.png)
Main Shaft: Service and Repair
DISASSEMBLY
1. Check end play of front drive sprocket.
Standard: 0.2 - 0.35 mm (0.0079 - 0.0138 inch)
If end play is beyond the maximum value, check front drive sprocket and clutch gear for wear.
2. Remove retainer ring, speedometer drive gear and steel ball. Be careful not to lose the steel ball.
3. Remove snap ring and spacer.
4. Press out front drive sprocket with mainshaft rear bearing and clutch gear together.
5. Remove needle bearing.
