Frontier 2WD L4-2.5L (QR25DE) (2005)
-
When CAN communication operation is detected, it switches to CAN communication status.
-
When a state of the following switches changes, it switches to CAN communication state:
-
Key switch
-
Hazard switch
-
Door lock/unlock switch
-
Front door switch LH, RH
-
Rear door switch LH, RH (Crew cab)
-
Rear door switch upper LH, RH (King cab)
-
Rear door switch lower LH, RH (King cab)
-
Combination switch (passing, lighting switch 1st position, front fog lamp)
-
Keyfob (lock/unlock signal)
-
Door lock assembly LH (key cylinder switch)
-
When control performed only by BCM is required by switch, it shifts to CAN communication inactive mode.
-
Status of combination switch reading function is changed.
SYSTEMS CONTROLLED BY BCM DIRECTLY
-
Power door lock system. Refer to "POWER DOOR LOCK SYSTEM".
-
Remote keyless entry system. Refer to "REMOTE KEYLESS ENTRY SYSTEM".
-
Power window system. Refer to "POWER WINDOW SYSTEM".(NOTE)
-
Sunroof system. Refer to "SUNROOF". (NOTE)
-
Room lamp timer. Refer to "INTERIOR ROOM LAMP".
-
Warning chime system. Refer to "WARNING CHIME".
-
Turn signal and hazard warning lamps system. Refer to "TURN SIGNAL AND HAZARD WARNING LAMPS".
NOTE: Power supply only. No system control.
SYSTEMS CONTROLLED BY BCM AND IPDM E/R
-
Panic system. Refer to "REMOTE KEYLESS ENTRY SYSTEM".
-
NVIS (NATS) system. Refer to "NVIS(NISSAN Vehicle Immobilizer System-NATS)".
-
Headlamp, tail lamp, auto light (Crew cab) and battery saver control systems. Refer to "HEADLAMP (FOR USA)" or "HEADLAMP (FOR
CANADA) - DAYTIME LIGHT SYSTEM -".
-
Front wiper and washer system. Refer to "FRONT WIPER AND WASHER SYSTEM".
-
Rear window defogger system (Crew cab). Refer to "REAR WINDOW DEFOGGER".
Major Components And Control System Part 1