Frontier 2WD L4-2.5L (QR25DE) (2005)
Rear Bumper: Service and Repair
REAR BUMPER
Removal and Installation
REMOVAL
NOTE: It is not necessary to remove the tow hitch (if equipped) to service the rear bumper.
1. Remove upper and lower step pads.
2. Disconnect license lamp harness RH/LH.
3. Release clips from license lamp RH/LH, then remove lamps from rear bumper.
4. Remove rear bumper.
5. Remove rear bumper reinforcement from frame.
6. Remove tow hitch (if equipped).
INSTALLATION