Frontier 2WD L4-2.5L (QR25DE) (2005)
Combination Switch: Scan Tool Testing and Procedures
With Manufacturer's Scan Tool (CONSULT-II)
DATA MONITOR
Operation Procedure
1. Touch "COMB SW" on "SELECT TEST ITEM" screen.
2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on "SELECT MONITOR ITEM" screen.
4. Touch "START".
5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the signals will be
monitored.
6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
Display Item List
Combination Switch Reading Function
Combination Switch Reading Function
For details, refer to Body Control Systems, "COMBINATION SWITCH READING FUNCTION". See: Combination Switch Reading Function