nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Engine Controls - DTC P0420 Stored In The ECM|Page 9765 > < Engine Controls - ECM Programming Interruption Recovery|Page 9760
Page 1
background image

Technical Service Bulletin # 10-045

Date: 100319

Engine Controls - DTC P0420 Stored In The ECM

Classification: EC10-008

Reference: NTB10-045

Date: March 19, 2010

2005-2006 FRONTIER WITH QR25 ENGINE; DTC P0420 (TW CATALYST SYS-B1) STORED IN THE ECM

APPLIED VEHICLE: 2005-2006 Frontier (D40) 

APPLIED ENGINE: QR25 ONLY

IF YOU CONFIRM:

DTC P0420 (TW CATALYST SYS-B1) is stored in the ECM,

ACTIONS:

Step A: Confirm this bulletin applies:

^ Check the Current ECM Part Number.

^ Compare your Current ECM Part Number to Chart A.

If that part number does not match one in Chart A, this bulletin does not apply. Go back to ASIST for further diagnostic and repair information.

Step B: Replace the exhaust manifold catalyst.

Step C: Reprogram the ECM.

IMPORTANT:

The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.

PARTS INFORMATION

Engine Controls - DTC P0420 Stored In The ECM|Page 9765 > < Engine Controls - ECM Programming Interruption Recovery|Page 9760