Frontier 2WD L4-2.5L (QR25DE) (2005)
9. Tighten bolt 1, 2 and 3 temporarily to prevent dislocation. After that tighten them in order (1 -> 2 -> 3), and then tighten other bolts.
10. Tighten control valve with TCM mounting bolts to the specified torque. Refer to COMPONENTS.
11. Connect A/T fluid temperature sensor 2 connector.
12. Securely fasten terminal cord assembly and A/T fluid temperature sensor 2 harness with terminal clips.
13. Connect revolution sensor connector.
14. Securely fasten revolution sensor harness with terminal clips.
15. Install oil pan to transmission case. Refer to Installation.
16. Pull up A/T assembly harness connector.
CAUTION: Be careful not to damage connector.