Frontier 2WD L4-2.5L (QR25DE) (2005)
/Page-121001.png)
Control Unit: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Disconnect the differential lock control unit connector.
3. Remove the two bolts and remove the differential lock control unit.
INSTALLATION
Installation is in the reverse order of removal. When installing differential lock control unit, tighten bolts to the specified torque.
Differential lock control unit bolts: 5.1 Nm (0.52 kg-m, 45 inch lbs.)
