Frontier 2WD L4-2.5L (QR25DE) (2005)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal and Installation for Refrigerant Pressure Sensor
REMOVAL
1. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure".
2. Disconnect the refrigerant pressure sensor harness connector and remove the refrigerant pressure sensor from the condenser.
CAUTION: Be careful not to damage the condenser fins.
INSTALLATION
Installation is in the reverse order of removal.
Refer to "Components".
CAUTION:
-
Be careful not to damage the condenser fins.
-
Apply compressor oil to the O-ring of the refrigerant pressure sensor for installation.
-
After charging refrigerant, check for leaks.