nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABS/TCS - VDC/Slip Light ON/DTC C1143/C1144/C1156/C1163|Page 2460 > < ABS/TCS - VDC/Slip Light ON/DTC C1143/C1144/C1156/C1163|Page 2454
Page 1
background image

Steering Angle Sensor: All Technical Service Bulletins
ABS/TCS - VDC/Slip Light ON/DTC C1143/C1144/C1156/C1163

Classification: EC08-003A

Reference: NTB08-027A

Date: August 26, 2008

2005 - 2008 PATHFINDER, XTERRA, FRONTIER; VDC & SLIP LIGHT ON & DTC C1143, C1144, C1156, C1163

This bulletin contains amended Service Procedure and Parts Information. Please discard all earlier versions.

APPLIED VEHICLES: 
2005-2008 Pathfinder (R51) 
2005-2008 Xterra (N50) 
2005-2008 Frontier (D40)

IF YOU CONFIRM

The VDC and SLIP lights are ON, and one or more of the following DTCs are stored in the ABS control unit:

C1143 (ST ANGLE SEN CIRCUIT)
C1144 (ST ANGLE SEN SIGNAL)
C1156 (ST ANG SEN COM CIR)
C1163 (ST ANGL SEN SAFE)

ACTIONS

Refer to the Service Procedure.

NOTE:

Do Not replace the Steering Angle Sensor unless the diagnostic inspection leads to its replacement.

ABS/TCS - VDC/Slip Light ON/DTC C1143/C1144/C1156/C1163|Page 2460 > < ABS/TCS - VDC/Slip Light ON/DTC C1143/C1144/C1156/C1163|Page 2454