Frontier 2WD L4-2.5L (QR25DE) (2005)
CLAIMS INFORMATION
SERVICE PROCEDURE
WARNING:
The steering system may be hot. Allow to cool down before inspection/repairs.
1. Remove the power steering oil cooler.
^ Refer to the G>STEERING section of the Electronic Service Manual (ESM), if needed.
^ Remove the oil cooler from the bracket, but leave the bracket mounted to the radiator core support (see Figure 1).
>
This bracket will remain installed for support of the hood lock cable.
2. Temporarily put the new oil cooler in place with the two existing mounting studs and nuts.