Frontier 2WD L4-2.5L (QR25DE) (2005)
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
NOTE:
P/N 44003-7S000 is considered a shop supply. Do NOT include it on your Warranty Claim.
CLAIMS INFORMATION
Submit a Primary Operation (P0) line claim using the claims coding shown.
SERVICE PROCEDURE
1.
Insert a flat blade screw driver between the wind-up clip (not plastic cover) and the leaf springs to spread the wind up clip approximately 2 mm/
1/16 inch.
Caution:
Do not insert screw driver blade between plastic clip cover and leaf spring. Insert the blade at the highest corner of the clip to avoid doing this.