Frontier 2WD V6-3.3L (VG33E) (2003)
Components
Removal
1. Perform the Fuel Pressure Release Procedure.
2. Remove the timing belt.
3. Drain the engine coolant by removing the drain plugs from both sides of the cylinder block.
4. Separate the ASCD and accelerator control wires from the intake manifold collector (VG33E only).
5. Remove the intake manifold collector (VG33E only).
6. The following parts must be disconnected.
a. Harness connectors for:
^
IACV-AAC valve