Frontier 2WD V6-3.3L (VG33E) (2003)
Heater Core: Service and Repair
HEATER CORE
Removal and Installation
REMOVAL
1. Drain cooling system.Disconnect the two heater hoses from the engine compartment side.
3. Remove the cooling unit. See: Evaporator Case/Service and Repair
4. Remove the steering member assembly. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
5. Remove the heater unit.
6. Remove the heater core.
INSTALLATION
Installation is the reverse order of removal.