Frontier 2WD V6-3.3L (VG33E) (2003)
26.
Press [START].
^
After a few seconds, the window shown in Figure 18 will appear.
^
CONSULT-II will now turn "OFF" its screen backlight.
^
When the screen backlight goes "OFF", ECM reprogramming has started.
NOTE:
This process will take from 10 to 20 minutes.
CAUTION:
You must leave the vehicle and the CONSULT-II unit "undisturbed" (don't touch) until reprogramming is complete.
NOTE:
If CONSULT-II screen gives you an error message "Unmatch of Vehicle Data":
^
You tried to reprogram with an incorrect data file, or
^
You are trying to reprogram with a file that is already in the ECM.
27.
When the reprogramming is complete, CONSULT-II will "beep", turn the screen backlight back "ON" and automatically print out a report (see
Figure 19).
^
Remember it may take up to 20 minutes.
A.
Attach the print-out to the repair order for future reference.
CAUTION