Frontier 2WD V6-3.3L (VG33E) (2003)
Seals and Gaskets: Service and Repair
Replacing Rear Oil Seal-2WD Model
REMOVAL
1. Remove the propeller shaft.
2. Remove rear oil seal using Tool.
^
Always replace with a new rear oil seal once it has been removed.
Tool number: ST33290001 (J25810-A)
INSTALLATION
1. Install new rear oil seal until it stops.
^
Apply multi-purpose grease to seal lip of oil seal before installing.
Tool number: ST33400001 (J26082)
2. Installation is in the reverse order of removal.