Frontier 2WD V6-3.3L SC (VG33ER) (2004)
Throttle Position Sensor/Switch: Diagnostic Aids
Control Units and Electrical Parts
Control Units and Electrical Parts
PRECAUTIONS
-
Never reverse polarity of battery terminals.
-
Install only parts specified for a vehicle.
-
Before replacing the control unit, check the input and output and functions of the component parts.
-
Do not apply excessive force when disconnecting a connector.
-
If a connector is installed by tightening bolts, loosen bolt mounting it, then take it out by hand.
-
Before installing a connector, make sure the terminal is not bent or damaged, and then correctly connect it.
When installing a connector by tightening bolts, fix it by tightening the mounting bolt until the painted projection of the connector becomes even
with the surface.
-
For removal of the lever type connector, pull the lever up to the direction pointed to by the arrow A in the figure, and then remove the connector.