Frontier 2WD V6-4.0L (VQ40DE) (2009)
5. Remove the master cylinder assembly.
INSTALLATION
Installation is in the reverse order of removal.
-
Use new master cylinder assembly nuts for installation.
CAUTION:
Do not reuse the master cylinder assembly nuts.
-
Refill the brake fluid and bleed the air. Refer to See: Brake Bleeding/Service and Repair.
CAUTION:
-
Refill using recommended brake fluid. Refer to See: Brake Fluid/Service and Repair/Removal and Replacement.
-
Do not reuse drained brake fluid.
-
Adjust the brake pedal. Refer to See: Brake Pedal Assy/Testing and Inspection.
-
Apply silicon grease to the brake booster at position (A) as shown when installing the master cylinder assembly to the brake booster.
Exploded View
BRAKE PEDAL
Exploded View