Frontier 4WD V6-3.3L (VG33E) (2003)
/Page-1166017.png)
6.
Tighten the Forcing Screw of the Extension Tube until the rotor ring is pulled free (see Figure E5). Do not use an impact wrench to tighten the
Forcing Screw.
^
Remove the Sleeve, Collets, Extension Tube, and ABS rotor ring from the axle shaft.
Inner Wheel Bearing/Backing Plate Removal
7.
Clamp the vehicle's axle shaft assembly standing up (on the wheel studs) in a soft-jaw vise (see Figure E6).
8.
Bearing Lock Nut Lock Washer:
^
Bend the tabs down with a hammer and punch (see Figure E7).
9.
Bearing Lock Nut Wrench:
