Frontier SC King Cab 2WD V6-3.3L SC (VG33ER) (2002)
Electronic Brake Control Module: Service and Repair
Removal
1) Disconnect battery cable.
2) Drain brake fluid.
3) Disconnect ABS actuator and electric unit (control unit connector) and brake pipes.
4) Remove mounting bracket fixing bolts and nuts.
Installation
CAUTION: After installation, refill brake fluid. Then bleed air.
1) Connect brake pipes temporarily.
2) Tighten fixing bolts and nuts.
3) Tighten brake pipes.
4) Connect connector and battery cable.