Frontier SC King Cab 2WD V6-3.3L SC (VG33ER) (2002)
6. Turn wheel bearing lock nut back 45 degrees.
7. Fit adjusting cap and new cotter pin. Align cotter pin slot by loosening nut 15 degrees or less.
8. Measure wheel bearing preload and axial end play.
Axial end play:.....................0 mm (0 inch)
Wheel bearing preload (As measured at wheel hub bolt):
New grease seal.......................9.8 - 28.4 N (1.0 - 2.9 kg, 2.2 - 6.4 lbs.)
Used grease seal............................9.8 - 23.5 N (1.0 - 2.4 kg, 2.2 - 5.3 lbs.)
Repeat above procedures until correct bearing preload is obtained.
9. Spread cotter pin.
10. Install hub cap.