Frontier SC King Cab 2WD V6-3.3L SC (VG33ER) (2002)
Reverse Clutch Piston
Shake piston to assure that balls are not seized.
Apply compressed air to check ball oil hole opposite the return spring. Make sure there is no air leakage.
Also apply compressed air to oil hole on return spring side to assure that air leaks past ball.
Assembly
ASSEMBLY
1. Install D-ring and oil seal on piston.
Apply ATF to both parts.
2. Install piston assembly by turning it slowly and evenly.
Apply ATF to inner surface of drum.
3. Install return springs and spring retainer (VG33E only) or spring retainer (VG33ER only).