Frontier SC King Cab 4WD V6-3.3L SC (VG33ER) (2001)
10. Remove water hose for thermostat housing.
Timing Marks
11. Set No. 1 piston at TDC on its compression stroke by rotating crankshaft.
12. Remove crankshaft pulley bolt.
13. Remove crankshaft pulley using a suitable puller.
14. Remove front upper and lower belt covers.
-
Align punchmark on LH camshaft sprocket with punch mark on timing belt rear cover.
-
Align punchmark on crankshaft sprocket with alignment mark on oil pump housing.
-
Temporarily install crankshaft pulley bolt on crankshaft so the crankshaft can be rotated.