Frontier SC King Cab 4WD V6-3.3L SC (VG33ER) (2001)
/Page-1015002.png)
Cleaning Overview:
^
The 3M fuel injection cleaning system consists of a pressurized fuel injector cleaner can (3M P/N: 08956) that contains a mix of concentrated
cleaning chemicals, petroleum based product, and 100 psi nitrogen gas propellant.
^
The can contains a valve that keeps the can sealed after use.
^
The 3M fuel injector cleaner can is attached to the 3M tool with a quick connect adapter.
^
The tool is then connected to the vehicle's fuel rail via a regulator/hose, in place of the inlet hose coming from the vehicle's fuel pump.
^
A clamp tool is installed on the fuel return hose to block the cleaner from entering the fuel tank.
^
The cleaning can is hung from the underhood with a clip/hanger assembly.
^
This setup is known as a fuel rail flush type of cleaning system.
Cleaning Process:
^
The engine will run reasonably smooth at warm engine idle from the contents of the cleaner because it includes petroleum based product mixed with
the cleaner.
^
During cleaning, the vehicle's fuel pump is disabled and the fuel inlet hose, at the fuel rail coming from the fuel pump, is removed and plugged.
KIT NOTES:
