nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Intake Air Temperature Sensor > < Diagram Information and Instructions|Page 658
Page 2
background image

-

Install fuel level sensor as shown.

CAUTION:

-

Tighten bolts to specified torque.

Tightening Torque : 2.0 - 2.5 N.m (0.20 - 0.26 kg-m, 17.4 - 22.6 in-lb)

-

Always replace O-ring with a new one.

-

Make sure the connectors are clean and undamaged.

-

After installation, run engine and check for leaks at connections.

Intake Air Temperature Sensor > < Diagram Information and Instructions|Page 658